Products & Specifications

Wolfin’s Waterproofing Membranes Specifications

• Wolfin IB: 1.5 mm:  Standard general purpose waterproofing membranes - useful for new and retrofit roofing and liquid containment applications - allows most existing failed materials to stay. Colours are light grey or black.
• 2 mm:  The same as the above waterproofing membranes, but stronger for more onerous duty, such as girder tops on transom-top rail bridges or heavy-duty expansion joints. Regularly used for bridge waterproofing. Colour - black.
• Wolfinsteel:  This is 24 gge galvanised steel with an 0.8 mm thick layer of Wolfin factory bonded to one side. This is used for terminations (and intermediate fixings where required, such as high walls or long spans) and can be cut and bent to any desired size or shape.

All such details are encapsulated, as are all fixings and are predominantly designed to act in shear. They are also useful for fully integrated cappings and overflashings, and can be decorated (painted) if desired with any good quality acrylic coating. Standard colours are light grey or black.
• 316L Wolfinsteel:  This is the same as the Wolfinsteel above but the steel used is Low-Carbon Stainless Steel. This variant of the Wolfinsteel is used where there are particularly severe corrosion issues.  Black only.
• Wolfin AF 6:  An extruded section made of Wolfin IB, which is cast into concrete to form an efficient reglet termination, or intermediate strong point.
• Wolfin GWSK (reinforced, self-adhesive) is Wolfin M with a powerful, butyl-modified bitumen adhesive backing. They are the preferred waterproofing membranes for horizontal works in domestic, commercial and civil construction including bridge waterproofing and under asphalt.
• Wolfin Corners:  Preformed Internal and External corners for a tighter neater look. The Wolfin membrane welds direct to the corners.
• Terostat-Alu-Fixband:  120 mm wide self-adhesive tape used to seal Wolfin to non-porous surfaces such as glass and steel. It is not designed to hold the body of the membrane in place, but rather to seal off the edge termination to the non-porous material.
• Wolfinator:  Wolfinator is a structural grade adhesive that has been specially formulated for the bonding of Wolfinsteel/Cosmofinsteel to non-absorbent substrates including metals, ceramics, glass, stone etc. It will also adhere to slightly damp substrates, but not to surfaces with standing water.
• Terokal 914:  Primer for Terostat-Alu-Fixband when applied to porous surfaces. It is also used as a primer / sealer over monomeric PVC waterproofing membranes prior to the application of Terostat-Alu-Fixband

Wolfin is only sold to licensed Wolfin applicators. We recommend you check the license status with Wolfin Membranes Australia (phone 02 8336 1666 or email mail@projex.com.au) because many applicators claiming to be licensed and/or experienced Wolfin applicators are in fact not - and therefore cannot be supplied

.

This is a generic specification. If you want it to be a Wolfin-specific specification then insert the words Wolfin or Wolfinsteel in the appropriate places. Please do not hesitate to contact us if you would like us to do it for you.

Download Specification Sheets:

Click on the links below to download:

• Wolfin GWSK 
• Wolfin IB